Page 1 of 2
Size
Posted: Sat Sep 09, 2017 5:49 pm
by cgt75b
Hi peeps
Can someone tell me the size of the mag flange sealing plate bolts?
Thanks for any help.
Re: Size
Posted: Sat Sep 09, 2017 10:56 pm
by rosscla
The what?
Re: Size
Posted: Sun Sep 10, 2017 8:16 am
by Chris in Margate
I must have left mine off !
Do you mean the mag flange itself?
Re: Size
Posted: Sun Sep 10, 2017 8:29 am
by cgt75b
The sealing plate that the loom comes through mate
Re: Size
Posted: Sun Sep 10, 2017 9:21 am
by HxPaul
Re: Size
Posted: Sun Sep 10, 2017 10:42 am
by Donnie
m4 if memory serves
Re: Size
Posted: Sun Sep 10, 2017 11:15 am
by cgt75b
Thank you Donnie
Re: Size
Posted: Sun Sep 10, 2017 11:16 am
by cgt75b
Re: Size
Posted: Sun Sep 10, 2017 11:23 am
by cgt75b
rosscla wrote: ↑Sat Sep 09, 2017 10:56 pmThe what?
The sealing plate bolts ffs!!!!
Re: Size
Posted: Sun Sep 10, 2017 12:00 pm
by a.lo.v2
just a point to consider, most of the supplied kits have flat or crosshead screws which you will never get a screwdriver on with the engine and tank fitted. I always buy separately m4 hex screws that enable my 1/4 inch socket to get on in situ. handy if you are having stator problems at side of road.