Page 1 of 3
TSR Exhaust Vs ADS3 and the missing tailcan bracket debate
Posted: Wed Oct 01, 2014 11:06 am
by Donnie
This has been getting some interest on the LCGB with the main debate being about the lack of end can support
http://www.ebay.co.uk/itm/LAMBRETTA-TSR ... 3f3ddbeb45
Just wondered if there's a reason that there isn't any support for the can and the graphs on the ebay ad look good but wonder how they compare to something like the ADS3?
Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba
Posted: Tue Oct 14, 2014 10:53 am
by shocky
I saw them at wicksteed and they looked well made and quite heavy so id say a end bracket was a must
why go to the expense of making a 2 piece front pipe when a endcan support would be better and 5hey were 150 at Wicksteed
Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba
Posted: Tue Oct 14, 2014 11:49 am
by Andy W
Is anyone using one of these? be interested to hear what they are really like as their dyno print looks quite impressive from their website. Anyone know what engine this was tested on?
Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba
Posted: Tue Oct 14, 2014 5:52 pm
by Donnie
Bugger, i did look at wicky but must have missed them
Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba
Posted: Tue Oct 14, 2014 5:52 pm
by Donnie
who was selling them?
Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba
Posted: Tue Oct 14, 2014 10:52 pm
by shocky
Donnie wrote:who was selling them?
Not sure of there name but he's the from wales they were in the center near the food entrance
Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba
Posted: Tue Oct 14, 2014 11:43 pm
by mickjr
I think they have tried to copy the pipe design pipes,with a bigger pipe going to the silencer for strength,but pipe design have a bracket on the silencer to shock mount.
was it twisted rods flogging them?
Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba
Posted: Wed Oct 15, 2014 8:06 pm
by Donnie
Well i've had a look through pipedesign.de website and there aint a single exhaust on there for a lambretta with a bracket for the tail can.
Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba
Posted: Wed Oct 15, 2014 8:24 pm
by Yanker
mickjr wrote:I think they have tried to copy the pipe design pipes,?
The sales blurb/spec staes categorically that "Dyno-developed In Germany with cooperation of exhaust guru marco rentzmann over the last 2 years" and "The original brief was to design an exhaust system that would ........" suggesting that this product is the result of a collaboration and is therefore not an attempted copy and is fully licensed by the designer?
Ref the can support, surely this would have been specced by the designer and not deleted if it was remotely going to compromise structural integrity and result in a deluge of product returns?
Interesting looking budget system: let's see how it fares? If the 'gook' build and material quality is up to par than it should last well, especially as there are no stainless sections.....
Re: TSR Exhaust Vs ADS3 and the missing tailcan bracket deba
Posted: Mon Nov 24, 2014 1:35 pm
by Donnie
Sent tsr a message on here about a month ago so they either dont come on here or dont bother replying