Page 1 of 1
high low beam switch position
Posted: Sun Sep 21, 2014 8:51 am
by Micky Tapp
I am just replacing headlight bulb on my Italian GP200 with 12v conversion. It has dawned on me I don't know which switch position is high and which is low beam, can anyone help please?
Re: high low beam switch position
Posted: Sun Sep 21, 2014 11:05 am
by rosscla
Does it matter?
If i had to choose I'd go top in low, bottom in high. If you don't like it, swap the red and blue wires round at the bulb holder.
Re: high low beam switch position
Posted: Sun Sep 21, 2014 6:22 pm
by Micky Tapp
ta for reply rosscla, but I suppose I would just like to know how it was supposed to be when it left the factory
Just changed the bulb and fired it up, switch down seems to shine lower on the garage wall, that switch up, so I'll work with that for now
Re: high low beam switch position
Posted: Sun Sep 21, 2014 7:37 pm
by Muppet
Micky Tapp wrote:ta for reply rosscla, but I suppose I would just like to know how it was supposed to be when it left the factory
Just changed the bulb and fired it up, switch down seems to shine lower on the garage wall, that switch up, so I'll work with that for now
tis how it shud be
Re: high low beam switch position
Posted: Sun Sep 21, 2014 9:03 pm
by Micky Tapp
Thanks Muppet