Wiring Hoo Ha
-
dapper
- registered user
- Posts: 930
- Joined: Tue Jan 27, 2009 5:30 pm
- Main scooter: The Biriani Bullet
- Location: Brighton (well Hove actually)
- Contact:
And check for continuity between cables from one end of loom to the other in case there is a break somewhere in the loom.
Compact Toolbox Flywheel Holder
Easiest way to see if you have a short on a 12v DC. system is to check the fuse. If it isn't blown you don't have a short.Bilko wrote:Been told it could be a short somewhere, so Im going to strip the Lambretta.
To check you don't have a break in the loom, connect the loom brown direct to one of the headlamp sockets, check the lamp and it's earth first.
-
Bilko
- registered user
- Posts: 1346
- Joined: Thu Jan 08, 2009 12:06 pm
- Main scooter: LI150
- Location: Belfast
- Contact:
Thanks to everyone who helped here. Finally got it sorted tonight.
A tough combination of faulty ignition/dodgy battery and none standard set up was cracked by my mate tonight. I would never have got it in a million years.
A tough combination of faulty ignition/dodgy battery and none standard set up was cracked by my mate tonight. I would never have got it in a million years.