wiring woes

[philcasino1973]

got a new casa li 125 s3 light/horn switch with the push button kill switch still fitted as std
wire colours are slightly different with a grey wire and a twin brown can anyone point me in right direction to sort?
thks
phil

[philcasino1973]

got it sorted!!!
the grey wire was equivalent to the purple on the damaged switch connected it to the browns and everything working as it should
struggling to get gear selector cables/arms in right position seem to only have 3 gears!!!!!!!doh
any quick tipsfor setting them up
regards
phil

[philcasino1973]

sorted me gear adjustment issues too
moved the selector around on splines a couple of splines nearer to rear of bike ...this in turn allowed 1st gear to engage ..now got 4 gears and nice smooth action
must admit was panicking as the gearbox is the only part on the bike that i havent checked [foolishly] as i had it stripped as far as endplate with changing chain and front sprocket for a 17 t one
gave bike frst run today ....its got a mb 195 kit on[very nice] 30mm dellorto and clubman exhaust ...runs really well
just need to set carb up properly ............any pointers to this as 1st time of using one

taaaaaaaa phil