bgm/mb clubman exhaust
It sure revs out better and give a lot more power at high rpm so maybe it will fit your setup well, I need lower gearing...
-
- registered user
- Posts: 198
- Joined: Tue Nov 30, 2010 1:23 pm
- Main scooter: P200e
- Contact:
Anyone cut one open yet?
SF
[/quote]
SF
[/quote]
[quote="Spanish Fly"]Anyone cut one open yet?
not at that price...
not at that price...
Minority wrote:Think you've got a bit of a "Fixie" fixation going on there!
Yup with tv 200 gearing
You'd need a fair set of legs to push that gearing out ! Whats the story with the push bike ?
- victor
- registered user
- Posts: 403
- Joined: Mon Mar 19, 2012 1:09 pm
- Main scooter: Tv175 but currently a SS210 :)
- Location: London, UK
- Contact:
Think that would be something for scootering to catch up on when they do their next test of clubmans. After having dynoed them and tried them on the road they should be cut open to expose their internals and the quality of the building... That is all tested exhausts, that would be amazingly interestingSpanish Fly wrote:Anyone cut one open yet?
- coaster
- registered user
- Posts: 3125
- Joined: Wed Jan 07, 2009 12:35 pm
- Location: London and Norfolk
- Contact:
Interesting yes but not very fair to the company that has invested a fair bit of time/expertese/experience in design/R&D only to have it laid bare for all to copyvictor wrote:Think that would be something for scootering to catch up on when they do their next test of clubmans. After having dynoed them and tried them on the road they should be cut open to expose their internals and the quality of the building... That is all tested exhausts, that would be amazingly interestingSpanish Fly wrote:Anyone cut one open yet?
- victor
- registered user
- Posts: 403
- Joined: Mon Mar 19, 2012 1:09 pm
- Main scooter: Tv175 but currently a SS210 :)
- Location: London, UK
- Contact:
You might have a poing C, but if you want to copy it you'll need more than the small photos in the magazine. I dont think the cost of buying one to copy it is anything that hinders eventual pirates
Normally I've been informed you just buy what you need to copy of the shelf and send it to Hong Kong and you'll get a cost estimate back for a batch of thousand or so copies...
Normally I've been informed you just buy what you need to copy of the shelf and send it to Hong Kong and you'll get a cost estimate back for a batch of thousand or so copies...
dutch wrote:Angry Bloke wrote:With a little bit of fettling on a couple of fins and a notch in the cowling mine fitted ok
yeah i know with a bit of fettling it will go on but dont need to so wont.