This may help:
http://www.greenflag.net/dell/images/dneedle.gif
Search found 27 matches
- Mon Mar 10, 2014 2:32 am
- Forum: Carburettor Set-ups
- Topic: D 22 to D29 needle
- Replies: 1
- Views: 1566
- Thu Jan 17, 2013 10:53 pm
- Forum: Vespa Tech
- Topic: drt reed valve kit
- Replies: 3
- Views: 1234
Re: drt reed valve kit
Yup. DRT. It's for a large frame Vespa. You'll need to remove material from the case in order to give the reeds enough room to open. I chose to split the cases to do it. Could be really messy if you didn't. Installation moves the carb box slightly forward & up. Sounds weird, but everything fits....
- Tue Dec 04, 2012 2:07 pm
- Forum: Lambretta Tech
- Topic: 62x107 crank in a TS1
- Replies: 10
- Views: 3352
Re: 62x107 crank in a TS1
Ongoing topic which might shed some light on the idea:
http://scooterotica.org/forum/viewtopic ... 5&start=10
http://scooterotica.org/forum/viewtopic ... 5&start=10
- Tue Dec 04, 2012 2:02 pm
- Forum: Lambretta Tech
- Topic: 62x107 crank in a TS1
- Replies: 10
- Views: 3352
Re: 62x107 crank in a TS1
62 stroke with a 107mm rod doesn't sound awesome to me.
Maybe with a longer rod, but I think the 107 would make things hectic in terms on run-ability/durability.
Maybe with a longer rod, but I think the 107 would make things hectic in terms on run-ability/durability.
- Wed Jul 25, 2012 6:28 am
- Forum: Vespa Tech
- Topic: 26mm carb set up on malossi 210
- Replies: 8
- Views: 3645
Re: 26mm carb set up on malossi 210
Richer I think. Look at the amount & size of the holes. I've been told fewer/smaller = richer. Seems to be true from my experience.
- Mon Jul 23, 2012 7:25 pm
- Forum: Vespa Tech
- Topic: 26mm carb set up on malossi 210
- Replies: 8
- Views: 3645
Re: 26mm carb set up on malossi 210
I had fuel supply issues with those 26mm carbs as well. I think I got my hands on a Cosa float chamber cap - the needle was a 5.2mm instead of the normal 4.5mm & I think the aperture that it sits in had an inside diameter of around 2mm. More gas at a faster rate via the float chamber is the idea...
- Wed Feb 29, 2012 6:14 am
- Forum: Lambretta Tech
- Topic: Dellorto 25 on J125 TZR conversion. Help needed.
- Replies: 24
- Views: 7675
Re: Dellorto 25 on J125 TZR conversion. Help needed.
Dellorto 25mm jetting... On that setup... I'll take a wild stab in the dark. I'd start with a D29 needle 2nd clip up from the taper, 266 tube, idle jet of 52 & a main of 110 & see what it does. Might be good. Might be way off. Gotta start somewhere. :fb: Maybe put a larger aperture float nee...
- Tue Apr 19, 2011 12:09 am
- Forum: Vespa Tech
- Topic: First time kiitting - Pinasco 215 on 1980 P200e: advice plz
- Replies: 9
- Views: 5876
Re: First time kiitting - Pinasco 215 on 1980 P200e: advice
I've set up a few of those. My experience is that they can be a bit of a gas hog & tricky to get jetted properly. :freak: Sito plus was not finicky. The best ones I've seen run the stroked crank you're talking about. I like the 24g carb that comes on a t5 - drt makes a larger aperture float need...
- Thu Oct 14, 2010 6:45 am
- Forum: Lambretta Tech
- Topic: Small block reed block
- Replies: 10
- Views: 4592
- Thu Oct 14, 2010 6:43 am
- Forum: Lambretta Tech
- Topic: Small block reed block
- Replies: 10
- Views: 4592
Re: Small block reed block
You could use it either way, but the boost holes do help.