Search found 211 matches
- Sun Jan 28, 2018 5:36 am
- Forum: Lambretta Tech
- Topic: Mag Side Bearing Race Issue
- Replies: 13
- Views: 5343
Re: Mag Side Bearing Race Issue
Pulled the engine apart and trammed the cases/bearing surfaces. Turns out there was +/- 0.015 difference side to side on the drive side bearing surface, even more on the mag flange. Ended up machining both the drive side bearing surface a touch as well as the mag flange mounting surface of the case ...
- Wed Jan 03, 2018 11:31 pm
- Forum: Lambretta Tech
- Topic: Mag Side Bearing Race Issue
- Replies: 13
- Views: 5343
Re: Mag Side Bearing Race Issue
Muppet,
Looks like the bearing is an NU2205EG15J30. I don't think it's C3 with the larger internal clearance. Is the C3 designed for slight misalignment?
Looking at a NU2205-E-TVP2-C3. Anybody use one?
Looks like the bearing is an NU2205EG15J30. I don't think it's C3 with the larger internal clearance. Is the C3 designed for slight misalignment?
Looking at a NU2205-E-TVP2-C3. Anybody use one?
- Wed Jan 03, 2018 9:42 pm
- Forum: Lambretta Tech
- Topic: Mag Side Bearing Race Issue
- Replies: 13
- Views: 5343
Re: Mag Side Bearing Race Issue
Thanks for all the replies! I can't remember heating the race during installation, but I may have had to and that could very well have softened the race. I don't recall the installation being an issue, but that doesn't mean it didn't take a little heat to drive it on. I will definitely keep this in ...
- Wed Jan 03, 2018 7:06 am
- Forum: Liquid Cooled, Motorcycle Engine & Automatics Section
- Topic: Rotax 300 builld
- Replies: 242
- Views: 141175
Re: Rotax 300 builld
Parts & pieces as things go back together... https://farm5.staticflickr.com/4683/24598580797_3c45ac2575_h.jpg IMG_6245 by PotvinV8 , on Flickr https://farm5.staticflickr.com/4684/25595176498_e6518bb275_h.jpg IMG_6246 by PotvinV8 , on Flickr https://farm5.staticflickr.com/4601/24598580567_5f17bdb...
- Wed Jan 03, 2018 5:11 am
- Forum: Lambretta Tech
- Topic: Mag Side Bearing Race Issue
- Replies: 13
- Views: 5343
Mag Side Bearing Race Issue
Check the pics. Very few miles on this motor and the mag side crank race is looking pretty beat. I have a few ideas as to what could have caused this but before I go down another rabbit hole, thought I'd ask and see if there's a common issue that might be arising. My bet is on the bearing not being ...
- Sun Dec 31, 2017 6:01 am
- Forum: Lambretta Tech
- Topic: Detonation, lean seizure, or....?
- Replies: 33
- Views: 12196
Re: Detonation, lean seizure, or....?
Tore the motor down this afternoon and upon dry reassembly found a couple interesting things that I either overlooked or thought I'd compensated for. First up, piston raised 1.5mm above top of barrel... https://farm5.staticflickr.com/4736/39400763601_d8f3c707c8_h.jpg IMG_6231 by PotvinV8 , on Flickr...
- Fri Dec 29, 2017 5:53 am
- Forum: Liquid Cooled, Motorcycle Engine & Automatics Section
- Topic: Rotax 300 builld
- Replies: 242
- Views: 141175
Re: Rotax 300 builld
The EGT gauge arrived today from Classic Instruments. These guys do custom gauges for us all the time for hot rods and customs and whatnot, so it made sense to give them a call to get an EGT gauge that matched the R6 cluster. I think it will look pretty good when it's all said and done, and will hop...
- Thu Dec 21, 2017 4:15 am
- Forum: Lambretta Tech
- Topic: Detonation, lean seizure, or....?
- Replies: 33
- Views: 12196
Re: Detonation, lean seizure, or....?
Good points all around! I will definitely be looking closer at the combustion chamber as the new top end goes back together, including cc'ing the unit. Stock Ski Doo squish spec is 1.2 to 1.7mm and if I remember correctly, it was smaller than that, hence the cut. I already have a new head, piston, a...
- Sun Dec 17, 2017 7:23 pm
- Forum: Lambretta Tech
- Topic: Detonation, lean seizure, or....?
- Replies: 33
- Views: 12196
Re: Detonation, lean seizure, or....?
hi ryan, above post made me look at the photos again, and i noticed that your head is not the same as mine, yours has the squish band at 2 heights, mine is only one, what was your head off, heres a pic of mine https://farm5.staticflickr.com/4023/34900101473_a575b826f1_b.jpg IMG_1722_zpsu0s1igd4 by ...
- Sun Dec 17, 2017 7:20 pm
- Forum: Lambretta Tech
- Topic: Detonation, lean seizure, or....?
- Replies: 33
- Views: 12196