Search found 1129 matches
- Tue Feb 18, 2020 8:32 pm
- Forum: Vespa Tech
- Topic: No lights?
- Replies: 1
- Views: 2438
No lights?
Just finished building a Vespa px streetracer. Fully blasted painted and built with everything new, ie new switches loom regulator etc, the engine came out of another scoot so happy everything works ie stator etc, Scoot starts 2 nd kick but I have no other power, nothing. horn,lights,indicators fuel...
- Sun Feb 16, 2020 11:38 am
- Forum: Vespa Tech
- Topic: RZ Mk2 RH Exhaust fitment
- Replies: 2
- Views: 3517
Re: RZ Mk2 RH Exhaust fitment
I ran both on same set up revolver gave better pulling power low down but 1bhp lower then the rz on the dyno
- Sun Jan 05, 2020 7:56 pm
- Forum: Vespa Tech
- Topic: How to change PX back wheel.
- Replies: 4
- Views: 4025
Re: How to change PX back wheel.
Put a small block of wood under the right hand side stand leg, undo the rear hub big nut off split pin etc then lean it over to the right and it will all come off easy with out fouling the frame then take wheel off fit new and reverse process.
- Sun Dec 29, 2019 9:25 pm
- Forum: Vespa Tech
- Topic: Radiator size
- Replies: 4
- Views: 4289
Re: Radiator size
Cheers food for thought, also if not running a battery how do I get a pump to work
- Tue Dec 24, 2019 9:40 pm
- Forum: Vespa Tech
- Topic: Radiator size
- Replies: 4
- Views: 4289
Radiator size
What size radiator would be needed for a tuned px 190cc 24 bhp
- Wed Nov 06, 2019 11:16 pm
- Forum: Lambretta Tech
- Topic: Lambretta crank induction with Malossi MHR 221
- Replies: 34
- Views: 21517
Re: Lambretta crank induction with Malossi MHR 221
Nothing happening on the build ?
- Mon Dec 03, 2018 8:28 am
- Forum: Vespa Tech
- Topic: Help! SIP Road 2 Fitting.
- Replies: 9
- Views: 6946
Re: Help! SIP Road 2 Fitting.
I took the cage off offered it all in place (engine out of scoot and my m8 spot welded the nut in place works a treat.
- Sat Dec 01, 2018 7:47 pm
- Forum: Vespa Tech
- Topic: Regulator
- Replies: 0
- Views: 5512
Regulator
Can I use a 5 pin regulator instead of a 3 pin and where would the wires go.
- Thu Nov 29, 2018 11:17 pm
- Forum: Standard Scoots & Restorations
- Topic: PX frame prep, blast or dip?
- Replies: 2
- Views: 5760
Re: PX frame prep, blast or dip?
I have them blasted then use airline to clean out sprayed then wax oiled in struts
- Thu Nov 29, 2018 11:09 pm
- Forum: Vespa Tech
- Topic: Quick action throttle
- Replies: 1
- Views: 3035
Quick action throttle
Wanting to fit a quick action throttle on my px disc headset.
Which one will fit as there’s loads to choose from
Any ideas appreciated
Which one will fit as there’s loads to choose from
Any ideas appreciated